Our Principal Suppliers

The world’s biggest range of dry lubricants, wet lubricants and coating agents for your wire drawing process. Traxit supplies over 300 dry lubricants, wet lubricants, and coating agents, perfectly tailored for all wire drawing processes and with comprehensive services for the industry.

The requirements to be met for the optimum lubrication of the wire in cold forming are similar in all applications in the wire drawing industry: It needs to enable a high processing speed and productivity of the systems, with high process stability at the same time, along with a long die service life, low wear and low dust generation. Comprehensive services ensure that when it comes to our customers individual applications and drawing processes, they can be sure of using exactly the right dry lubricants, wet lubricants, and coatings for the pre-treatment of the wire and the wire drawing. Individual consulting advice and customer responsiveness are just as much part of this as the analysis of wire drawing processes and wire samples. Since 2020, Traxit has been taken over by Kluber Lubrication, an organization known for its outstanding lubrication solutions, customer-oriented service and innovation.

Most Common Products in India

Dry Calcium Lubricants – TR 41B, TR 42, CCF 6, GT 65, G 58
Dry Sodium Lubricants - F80 BXL, SL 7010
Emulsion – EHD 211
Coatings – ZEL 880 KRS

Paramount Die Company is now one of the largest wire die companies in the world and is the leading wire die company servicing the ferrous wire industry. Long known as an industry innovator, Paramount Die has introduced several products which have become the wire industry standard. Paramount Die's ParaLoc™ pressure system has contributed greatly to increasing drawing speeds and improving productivity in the wire industry and is the most widely utilized pressure die system in the world. Paramount Die's exchangeable carbide drawing inserts have made mass production of wire dies possible and have led to both increasing wire die consistency and decreasing overall die cost. Today more than 70% of ferrous wire companies either utilize drawing inserts exclusively or utilize them in part of their production. Paramount Die Company continues to reinvent its wire die manufacturing processes and has introduced automation and "lights out" capability to nearly every production process.

In India, Paramount Pressure Die Systems are widely used for manufacturing LRPC (PC Strand) wire, Spring Wire, Motor Tire Bead Wire, Welding Wire, Staple wire and several other applications.

Paramount Shaped dies are used manufacturing various shapes like oval, ovates and flats.

Paramount Shaving dies are used for shaving Stainless Steel and Carbon Steel wire Rods for high quality surface finish.

A guarantor of competence, quality, and reliability for more than 75 years. Founded more than 75 years ago, FUHR is a family-owned company and has been standing for the highest quality standards and a comprehensive service tailored to its customers‘ needs since the very beginning. Currently, FUHR GmbH & Co. KG is already being managed by the 3rd generation of the founding family and has mastered many economic ups and downs over the past decades. Today, the company is one of the few global players in its field. As a modern company, FUHR continues to develop dynamically and invest continuously in the modernisation of its operations and the expansion of its machinery and equipment.

The basis of FUHR’s success is their team of experienced and competent employees, which increasingly includes younger, highly-skilled workers. Hence, it considers itself well prepared for the challenges of the future.

In India, FUHR has supplies Cold Rolling Mills for Manufacturing Profile wires and strips from Stainless Steel and Carbon Steel Wires. The application ranges from Automotive Components, Springs and Circlips, Textile Applications and various other Engineering applications.
FUHR is growing from Strength to Strength and has a lot of experience in the field of rolling Non-Ferrous wires and strips.

Lamnea Bruk is a 100 plus year old company that manufactures machines for manufacturing of Wires.

“We can manufacture a wide variety of technological advanced machines for different wire types - from small single machines to complete lines.

We are in control over the entire production chain and take responsibility for EVERY part of the machine! Electrical design, programming, manufacturing of the machine and control cabinet assembly is all done on-site in Sweden.

We live our slogan “A passion for service”. Lämneå Bruk takes pride in offering excellent customer service before, during and after sale.”
- Jonas Hagstedt
President

In India, Lamnea Bruk has supplied and successfully commissioned Wire Drawing machines for High and Low Carbon Wire Drawing, Desclaing Systems, No Twist Coilers, Spoolers, Pointing Machines and Re-winding lines.

Please click here to share your requirements for .
For more information, visit www.lamnea.se

ECC is a privately owned and operated global producer of reliable, high-performance, colorable, pelletized compounds.

For more than a quarter century, ECC has provided innovative polymeric solutions that exceed rigorous industry standards. ECC offers its own proprietary product line as well as custom mixing services. Examples of materials produced include elastomeric and polyolefin based cross-linkable and thermoplastic compounds.

ECC’s unmatched product quality, continuous improvement, and technical expertise results in products with characteristics that include a unique combination of flexibility, electrical performance, aging stability, processability and more.

ECC’s highly skilled, knowledgeable staff and a comprehensive laboratory, which includes pilot scale production equipment, provide research and material evaluation resources to continuously develop innovative solutions to advance in the field of rubber and plastics technology. Experienced chemists and technicians provide customers with timely technical assistance for product support as well as the design and development of custom compounds to meet their specific needs and applications.

In India, ECC has been supplying to leading Cable Manufacturers with EPR based compounds.

Elaskon Sachsen GMBH & CO. KG can look back on experience and tradition going back 90 years. Elaskon products are available in over 60 countries. This has been made possible thanks to the approximately 80 efficient employees.

Quality and environmental management are core components of the company philosophy. In their laboratory facility, Elaskon works on achieving the corresponding level of quality assurance and also actively works on product optimisation and innovation.
The Elaskon Wire Rope Lubricants are available for Primary and Secondary Applications.
In India, Elaskon supplies Primary Rope Lubricants to Leading Wire Rope Manufacturers.

The Candor Group manufactures and supplies special chemicals, metals and equipment for the surface treatment, metal working and electronics industry. We are a leading manufacturer of plants assigned for the continuous plating of wire & strip, conventional electroplating and water purification.

Candor belongs to the industrial group Lotorp AB and has its production facilities and head office in Norrköping, Sweden. Candor has subsidiaries in Scandinavia and sales representatives/distributors across many countries globally.

In India, Candoe has been supplying the Additive Inhibitor E-1 for Efficient Copper Coating on Welding Wire.

Candor has also supplied lines for Nickel Plating on Stainless Steel Wires, Wire Cleaning Equipment and other plating equipments in India.

Sjogren : Delivering Innovation Across The Full Spectrum Of The Wire Tooling Industry For Nine Decades

Founded in 1927 by Oscar Sjogren, Sjogren Industries, Inc. has long been an innovator in the design and manufacturing of customized solutions for the wire tooling trades.

Today Sjogren Industries delivers custom manufacturing, high-quality machinery, tooling and accessories to a global customer base. The Sjogren belief that “simple ideas make better solutions” has been at the core of its innovative product designs since its inception. Sjogren continues to introduce enhancements in technology that deliver major efficiencies and increased productivity for its customers.

• Straightening Rollers for a wide diameter range
• Wire Pullers for a wide range in diameters and different styles

In India, Sjogren has suppliers Wire Straighteners for different Applications in Wire Drawing.

Carbides and tools from Boehlerit set standards in the processing of metal, wood, plastic and composite materials. The cutting material and tool specialists from the steel town of Kapfenberg in Styria solve the most demanding machining tasks in the materials of the future thanks to their 'proximity to the steel laboratory'. Cutting materials, semi-finished products and precision tools as well as tool systems for milling, turning, drilling and forming ensure process reliability and efficiency worldwide.

Paganoni, Division of Mario Nava S.p.A., is specialized in performing wear resistant coatings on mechanical parts for drawing machines.

The company started in the 70s and developed based on deep research and tests in the field.

The exceptional wear-resistance of the materials allows to draw any kind of metal wire, ferrous and non-ferrous, with excellent results in terms of life and quality of the end product.

WOLSIDE ® coating based on special tungsten carbides.
KERBLACK ® coating based on chrome oxide.
KERSINT ® sintered ceramics made of zirconium oxide-based components and other special minerals.
COLDSIDE ® coating based on special tungsten carbides.
NIKSINT ® coating based on nickel.

Paganoni, Division of Mario Nava S.p.A., apart from the standard range of products, is specialized in the manufacturing of mechanical parts according to specific customer's drawings.

In India, Paganoni has been suppying KERSINT® rings used in the Copper coating tanks for Welding Wire, WOLSIDE ® Coated cones for Wet Drawing machines and Drawing Blocks.